Language selection :
banner

Newslocation :Home > News

High alumina brick masonry method

 
The people who have a little understanding of the refractory are aware that high alumina brick is a refractory product with a certain shape and size. Clay brick, high alumina brick, silica brick, magnesia brick is brick. Then the laying method of high alumina brick and stone materials are what? Give you a detailed analysis of some common high alumina brick masonry method, the details are as follows:

1, side masonry method:
The side masonry method mainly used in two parts: one is the brick layer, such as open hearth and furnace bottom; the two side is brick vault, such as open hearth steel tapping hole arch.

2, vertical masonry method:
The vertical masonry also called vertical masonry, mainly used in two parts: one is the upper bottom, such as the open hearth bottom and bottom of the blast furnace; the two layer is the bottom of the work, such as the open hearth bottom.
High alumina brick masonry is divided into: 1, flat 2, side masonry 3, vertical masonry method, the following brief introduction!

3, flat stone method:
Flat masonry method mostly for furnace wall, there are a few for the bottom of the bottom. In our country, the most common method of flat brick, is a "one of the top" masonry wall. Circular brick (like blast furnace wall that also uses plain masonry method).

As straight standard high alumina brick 230x114x65 mm) for example, the maximum laid flat plane (230x114 mm). In a horizontal position; when the side side stone (also known as the surface, 230x65 mm) in a horizontal position; when the vertical masonry facet (114x65 mm) in a horizontal position.